XD - BONNET HAIR DRYER - STAND UP

A rolling hood dryer with a 60-minute timer, adjustable temperature to 75°C and a height-adjustable stand that rolls straight up to the chair.

A standing bonnet dryer for processing colour, setting, conditioning treatments and drying rollers. The hood lifts open so the client can be seated without ducking, then closes over the head for even all-round heat. Two dials on top of the housing set the time and the temperature independently, so the stylist can leave a client under the hood on a known setting and get on with the next chair. The telescopic stainless steel column adjusts to suit the chair and the client, and the four-arm base rolls on castors so the unit moves easily between stations and out of the way when it isn't needed.

Key Features

• Free-standing hood dryer on a wheeled base — no bench or wall space needed
• Height-adjustable telescopic column, stainless steel inner tube in an iron outer tube
• Four-arm X-shaped iron base on castors for easy repositioning
• Openable hood with a clear front section, so the client can see out and the stylist can check progress
• Timer dial with 0–60 minute range
• Temperature dial with a 0–75°C range and a cool setting
• Dual heating protection system
• Hydraulic thermostat, rated by the manufacturer for over 10,000 temperature-control cycles
• High-output motor for even airflow through the hood
• Removable back cover for access
• 220–240V, 50/60Hz, 1000W — suits Malaysian mains

What's Included

• 1 x stand-up bonnet hair dryer with hood, column and wheeled base

Specifications

How to Use

1. Position the dryer beside the chair and set the column to a comfortable height for the seated client.
2. Lift the hood open, seat the client, and lower the hood so it sits evenly around the head without touching the scalp.
3. Set the temperature dial to the level required for the service.
4. Set the timer dial to the processing or drying time. The dryer runs for the set period.
5. Check the client's comfort during the service and adjust the temperature if needed.
6. Switch off, raise the hood and move the unit clear of the chair.

Cautions

For professional salon use. Always check the client is comfortable with the temperature before leaving them under the hood, and check on them during the service. Keep the hood clear of the scalp, face and ears. Do not use on a client who cannot communicate discomfort. Do not cover or obstruct the air vents. Keep the unit away from water and never operate it with wet hands. Do not use near basins or in wet areas. Switch off and unplug when not in use and before cleaning. Wipe the housing with a dry or lightly dampened cloth only — never immerse any part of the unit. Allow the unit to cool before moving or storing. Ensure the base is on a level floor and the castors are clear before adjusting the height. Do not attempt repairs; refer servicing to a qualified technician.

Storage

Store upright in a dry area away from damp and direct heat. Lower the column and park the unit clear of walkways. Keep the power cable coiled and off the floor.

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.