X - VVS - 1999 - HAIR DRYER

Salon-grade drying power with the control to protect every finish.

The X Professional Vvs Hair Dryer pairs a strong, long-lasting AC motor with 2 speed and 3 heat settings plus an instant cold shot, so stylists can move from fast bulk-drying to a controlled, damage-conscious finish without switching tools. A gunmetal, textured barrel houses ionic technology to cut static and frizz, and it ships with two concentrator nozzles, a diffuser and a wall-mount holder — a complete professional kit in one box.

Key Features

• Ultra-strong, long-lasting professional AC motor for consistent, focused airflow
• 2 speed settings (Low / High) and 3 heat settings (Cold / Medium / Hot), plus an instant cold shot button for setting the style
• Built-in ionic technology to reduce static and frizz and add shine
• Rated 2100–2400W, 220–240V, 50/60Hz AC motor
• 3m extra-long swivel power cord with double insulation
• Removable rear end cap for easy access to the air inlet filter for cleaning
• Comes with one large and one small concentrator nozzle, plus a diffuser attachment
• Wall-mount holder included for tidy, off-counter storage
• 1 Year Warranty

What's Included

• 1x X Professional Vvs Hair Dryer
• 1x large concentrator nozzle
• 1x small concentrator nozzle
• 1x diffuser attachment
• 1x wall-mount holder
• 1x instruction manual
• Retail box

How to Use

1. Before use, check that the voltage on the rating label matches your home voltage. Plug the hair dryer into a standard power outlet, used separately from other appliances.
2. Ensure the power switch is set to "0" (OFF) before plugging in the cord.
3. On the handle, the first switch controls speed: "0" is off, "I" is low speed, "II" is high speed. The second switch controls heat: "I" is cold/low temperature, "II" is medium temperature, "III" is hot air mode.
4. For rapid drying, set the power switch to hot air mode. Dry hair starting from the roots for faster results.
5. If concerned about heat damage, use cold wind mode or medium-temperature mode, keeping at least 3cm between the nozzle and hair and at least 10cm between the air inlet and hair.
6. Fit the large or small concentrator nozzle for directed airflow, or the diffuser for a more natural finish.
7. Once you've achieved the desired style, switch to cold shot to set it with a continuous flow of cool air.
8. After use, set the power switch to "0" (OFF), unplug, and allow the dryer to cool completely before storing in a dry location.
9. Weekly, or as needed, remove the rear end cap by turning it counter-clockwise to access the air inlet filter — always unplug first. Clean the filter with a brush, then wipe gently with a damp (not soaked) cloth, and let it dry fully before reassembling and using again.

Cautions

• Do not use this appliance near bathtubs, showers, basins or any vessel containing water. If it falls into water, unplug it immediately — do not reach into the water.
• Electrical parts remain live even when the switch is off; always unplug immediately after use.
• Never place or store the appliance where it could fall or be pulled into a tub or sink.
• This appliance can be used by children aged 8 and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, only if they've been given supervision or instruction and understand the hazards involved. Children must not play with the appliance, and cleaning or maintenance must not be done by children without supervision.
• Never leave the appliance unattended while plugged in.
• Do not use an extension cord or a voltage converter with this appliance.
• Do not direct hot air toward eyes or other heat-sensitive areas.
• Nozzle and diffuser attachments may be hot during use — allow them to cool before handling.
• Do not place the appliance on any surface while it is operating, and keep hair away from the air inlets during use.
• Keep the cord away from heated surfaces and never wrap it around the appliance, as this causes premature wear and breakage. Handle the cord carefully — avoid jerking, sharp bends, twisting or straining, especially at the plug.
• Never block the air openings or place the appliance on a soft surface such as a bed or couch; keep air openings free of lint, hair and debris.
• Do not use water or any liquid directly on the filter — this can damage the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• This appliance has no user-serviceable parts beyond the described filter cleaning — seek repair from an authorised distributor or service centre for any malfunction.
• For bathroom use, installation of a Ground Fault Circuit Interrupter / residual current device (rated ≤30mA) is recommended for the electrical supply — ask your installer.

Storage

Unplug from the mains when not in use and allow the dryer to cool completely before storing. Never wrap the cord around the appliance. Store in a dry location, out of reach of children, ideally on the included wall-mount holder.

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.