Wahl

WAHL - 3031785 - COLOR STYLE DUO CORDLESS TRIMMER

In Stock
Enquire on WhatsApp
Description

Two blades, nine guides and up to 4 hours of cordless runtime for clean lines and sharp edges.

The Wahl Professional ColorStyle Duo Cordless Trimmer (model 2520LP) is a rechargeable trimmer for barbers and stylists who do lining, edging and contour work. It comes with a 0.4 mm U-Blade for smooth trimming and a 0.2 mm T-Blade for fine detail, so one tool covers both jobs. A quiet 6000 RPM motor and a raspberry-to-black gradient finish complete the design.

Key Features

  • Two blades included: the 0.4 mm U-Blade suits smooth trimming, straight edging and wide lining. The 0.2 mm precision T-Blade suits delicate contours, clean line-ups, sharp edges and detail work.
  • Long cordless runtime: up to 4 hours (240 minutes) on a single charge, according to Wahl. A full charge takes about 2.5 hours (150 minutes).
  • Quiet, high-performance motor: 6000 RPM, with a sound level below 62 dB(A).
  • Quick-detach blades: blade changes and cleaning are quick, and the blade is zero-gap adjustable.
  • Lightweight and ergonomic: 142 g with the U-Blade, 140 g with the T-Blade.
  • LED charge indicator: the light shows charging status at a glance.
  • Travel lock: holds the trimmer off during transport.
  • Two ways to charge: use the USB charging cable or the charge stand.
  • Nine guides: six for the U-Blade and three for the T-Blade.

What’s Included

  • Trimmer, with 0.4 mm U-Blade and 0.2 mm T-Blade
  • Charge stand
  • USB charging cable
  • Cleaning brush and blade oil
  • Quick start guide and multilingual manual
  • Nine guides:
Blade Guide sizes
U-Blade (6) 1.5 mm, 2.25 mm (#¾), 3 mm (#1), 4.5 mm (#1½), 6 mm (#2), 9.5 mm (#3)
T-Blade (3) 1.5 mm, 3 mm, 5 mm

How to Use

  1. Charge: place the trimmer on the charge stand or connect the USB cable. The LED shows red while charging and green when fully charged.
  2. Choose a blade: switch the trimmer off, remove the fitted blade as shown in the quick start guide, and fit the other one.
  3. Add a guide if needed: use the U-Blade guides with the U-Blade and the T-Blade guides with the T-Blade.
  4. Trim: press the power button to switch on. Hold the button for 3 seconds (the LED flashes 3 times) to lock it for travel. Repeat to unlock.
  5. Clean after each use: switch off, brush away loose hair, and put a drop of Wahl Clipper Blade Oil at the points shown in the guide. Run the trimmer for about 10 seconds, switch off, then wipe with a soft cloth.

Cautions

  • For professional use on human hair, beard hair and eyebrows only. Do not use on animals.
  • Keep dry. Never place in or drop into water. Unplug the charger before cleaning.
  • Tip the unit blade-down when cleaning, and dry the blades completely before oiling. Liquid inside the unit can damage the battery and cause a fire risk.
  • Blades may become hot after prolonged use. Do not use with a damaged or broken blade or guide.
  • Charge only with the supplied USB cable and a certified USB source, such as a computer or class 2 power supply. Charge, use and store between 10–40°C, away from direct sunlight.
  • The lithium-ion battery is non-replaceable. Do not crush, disassemble, pierce, short-circuit, heat above 100°C or incinerate the unit.
  • Oil blades only with Wahl Clipper Blade Oil. Do not use solvents, abrasives, bleach, benzene or thinner.
  • Switch the trimmer off before setting it down. Do not use it outdoors or near aerosol sprays.
  • Keep out of reach of children. Children must not play with it or clean it unsupervised.

Storage
Store dry, between 10–40°C and away from direct sunlight. Switch on the travel lock when transporting. Keep the cable untwisted and uncrushed.

100% Original Guarantee

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

Trade Pricing — How It Works

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Warranty & Support

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.