NYA - 628 - SMART INTELLIGENT TEMPERATURE CONTROL DIGITAL PERM MACHINE - BLACK

Floor-standing digital perm machine with an overhead lead rack and 40 perm rods in four sizes.

The Onesaid 628 Smart Digital Perm Machine is a salon digital perm unit in black, with digital temperature control. It stands on castor wheels, so it moves easily between stations. The leads hang from an overhead rack, and each lead branches into several plug-in connectors for the heated perm rods. It comes with 40 perm rods, 10 each in 18mm, 20mm, 22mm and 24mm, so you can choose the curl size.

Key Features

• Digital temperature control from an angled control panel at the top of the column
• Overhead rack keeps the leads off the floor and away from the client
• Branched leads, each with several right-angle plug-in connectors
• Slotted cable organiser bar keeps the leads separated and tidy
• 40 perm rods in four sizes: 18mm, 20mm, 22mm and 24mm diameter, each 116mm long
• Rods connect by a plug-in jack
• Floor-standing column on castor wheels
• Vented column base
• Black finish

What's Included

• 1 x Onesaid 628 digital perm machine with overhead lead rack and leads
• 40 x perm rods: 10 each of 18mm, 20mm, 22mm and 24mm (116mm long)
• 1 x power cord

How to Use

• Wheel the machine beside the client and plug in.
• Switch on and set the temperature on the control panel.
• Apply and process the perm lotion as instructed by the lotion manufacturer. Then wind the hair onto the rods.
• Plug each rod into a lead connector, then run the heating cycle.
• When the cycle ends, unplug the rods and let them cool. Then continue with the neutraliser as instructed by its manufacturer.
• Switch off and unplug after use. Hang the leads back on the rack.

Cautions

• For trained professional use only.
• Heated rods get hot. Protect the scalp and skin, and check the client's comfort throughout the service.
• Never leave a client unattended while the rods are heating.
• Use only rods that are rated for this machine.
• Keep the machine, leads and connectors away from water. Do not plug in or handle with wet hands.
• Check the leads and connectors before each use. Do not use if any lead is damaged.
• Do not pull the leads to unplug a rod. Hold the connector.
• Keep the vents clear while in use.

Storage
Let the rods cool fully before storing. Keep the machine in a dry place, with the leads hung loosely on the rack.

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.