FUN KOR - TITANIUM IRON (SMALL)

A compact Korean-made titanium-plate flat iron with digital temperature control — built for precision work on fine sections.

The Fun Kor (아름다운 로만) Small titanium iron packs professional-grade heat into a narrow 20mm plate, making it ideal for short hair, fringes, detailed sectioning and precision straightening around the face. Titanium plates heat rapidly and maintain a stable temperature under continuous use. Digital temperature control adjustable from 130°C to 230°C in 5°C increments lets stylists dial in the exact setting for each hair type. A 40-minute auto shut-off and tilting cushion plates add safety and reduce hair pulling during passes.

Key Features

• Titanium-coated plates (20mm × 90mm) for fast, even heat transfer and smooth glide
• Tilting cushion plate design reduces tension and hair pulling during passes
• Digital temperature control from 130°C to 230°C (250°F–450°F) in 5°C increments via FND display
• Temperature memory function recalls the last-used setting at start-up
• Ceramic heater element for rapid heat-up (reaches operating temperature in approximately 40 seconds)
• 40-minute auto shut-off safety timer
• 360° swivel cord (2.5m) to prevent tangling
• Lock function for safe storage and transport
• Temperature-sensing silicone indicator changes colour with heat
• Compact body: 25mm (W) × 257mm (L) × 37mm (H)
• Rose gold/brown metallic finish
• Made in Korea

How to Use

1. Plug in and press the ON/OFF button. The power indicator LED will illuminate and the FND display will show the initial temperature (defaults to 230°C or the last memorised setting).
2. Use the temperature up/down buttons to adjust to the desired setting. The adjustable range is 130°C to 230°C in 5°C increments. Start at a lower temperature for fine, coloured or chemically processed hair.
3. Allow approximately 40 seconds for the plates to reach the set temperature. Lightly touch the centre of the plates to check readiness.
4. Section the hair and comb through. Place the section between the plates and clamp lightly — the tilting cushion plates will adjust to the hair.
5. Glide the iron smoothly from root to tip in a single continuous motion.
6. After use, press the ON/OFF button to turn off. Unplug the cord and allow the unit to cool fully before storing. Use the lock function to keep the plates closed during storage.
7. The unit will automatically shut off after 40 minutes of non-use as a safety precaution.

Cautions

• The plates reach very high temperatures within seconds. Avoid contact with the heated plates, the surrounding housing and any skin.
• Do not immerse in water or liquids. Do not use near basins, sinks or other water sources.
• Keep out of reach of children.
• Always unplug the appliance when not in use or before cleaning.
• Do not leave unattended while switched on.
• Do not place on any heat-sensitive surface while hot. Always allow to cool fully before storing.
• Do not wrap the cord around the appliance — this may damage the cord over time.
• If the supply cord is damaged, discontinue use immediately. The cord must be replaced by the manufacturer or a qualified service agent.
• No repair should be attempted by the user.
• Use a heat protectant spray before styling to minimise heat damage.

Storage

Allow to cool fully. Engage the lock function to close the plates, then store in a cool, dry place away from heat-sensitive surfaces. Do not wrap the cord tightly around the unit.

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.