CODOS – T9 – CORDLESS HAIR CLIPPER

Five hours of cordless runtime, a ceramic-on-titanium blade set, and four taper lengths on a single lever.

The Codos T9 is a professional cordless clipper built around a 2500mAh lithium-ion battery that runs for roughly five hours on a three-hour charge — enough for a full day of cutting without reaching for the cable. The blade pairs a titanium-plated alloy fixed blade with a ceramic moving blade for a hard, sharp cutting edge that holds up to heavy salon use. A thumb-operated lever steps the cutting length through four settings without changing the blade, and two dual-sided guide combs cover the longer lengths. A three-light indicator shows battery level at a glance, and the clipper runs plugged in if the battery is flat mid-cut.

Key Features

• Cordless lithium-ion operation, approximately 300 minutes of runtime per charge
• Approximately 3-hour charge time
• 3.6V 2500mAh lithium-ion battery, no memory effect
• Titanium-plated alloy fixed blade with ceramic moving blade
• Four-step taper lever: 1.0mm, 1.3mm, 1.6mm and 1.9mm, with a lock to hold the setting
• Two dual-sided guide combs covering 3mm, 6mm, 9mm and 12mm
• Three-LED battery level and charging indicator
• Over-charge and over-discharge protection
• Runs corded from the charger if the battery is depleted
• 100–240V, 50/60Hz charger — compatible with Malaysian mains
• Removable blade head for cleaning and oiling
• Textured rubber grip along the handle

What's Included

• 1 x Codos T9 cordless hair clipper
• 2 x dual-sided guide combs (3mm / 6mm and 9mm / 12mm)
• 1 x cleaning brush
• 1 x bottle of clipper oil
• 1 x mains charger with UK-style three-pin plug
• 1 x instruction manual and warranty card

Specifications

How to Use

1. Charge fully before first use. Switch the clipper off, connect the charger, and plug it in — the indicator lights flash while charging and hold steady when full.
2. Set the cutting length with the taper lever. Push it up for shorter lengths; press the lock and slide down for longer ones.
3. For longer cuts, push a guide comb onto the blade head until both sides click into place.
4. Cut as normal. If the battery runs out mid-service, connect the charger and keep working.
5. After each use, push the blade head off with your thumb, brush the cut hair away, apply one or two drops of clipper oil to the oiling points, and click the blade head back on.

Before refitting the blade head, set the taper lever to the 1.9mm position. Do not dismantle the blade spring.

Cautions

For cutting human hair only — this clipper is not intended for grooming pets, and the manufacturer accepts no responsibility for injury to animals or damage to the appliance if used that way. Do not dismantle the appliance. Do not wash it with water or store it in a damp place; wipe the body with a lightly dampened cloth or a neutral soap solution. Do not charge near a heat source, above 40°C, or below 0°C — an ambient temperature of 5–40°C is best. The clipper becoming warm during use or charging is normal. Contains a lithium-ion battery: do not incinerate, crush or expose to high temperatures, and dispose of it through an appropriate recycling point. Keep out of reach of children.

Storage

Store in a cool, dry place away from direct sunlight and damp. Keep the blade oiled between uses and store the guide combs together with the unit.

Every product is 100% original stock from authorised channels — never grey-market. NX is the sole distributor of Venash Professional & Alushe in Malaysia. See our full Authenticity Guarantee page for details.

No registration, no SSM certificate, no minimum order. Walk in to our Sungei Wang Plaza outlet, or WhatsApp +60 16-297 6299 for your salon's pricing — single units and bulk both welcome.

Electrical tools are covered by a warranty handled directly by NX in Kuala Lumpur — typically 1–12 months depending on the product. WhatsApp us or visit our outlet with proof of purchase to claim.