Airflow Hair Straighteners: How They Work and Which Temperature to Use
Share
Most straightening services use two tools. The flat iron does the smoothing, then the blow dryer comes back out to set the finish. An airflow straightener does both jobs with one tool, and for a busy salon that means one less thing to pick up with every section.
In short: an airflow straightener is a flat iron with a built-in fan. When the plates close on a section of hair, air blows through the tool, so the hair is straightened and set in the same pass. As a starting point, use 170°C for fine or processed hair, 200°C for medium hair and 230°C for thick or coarse hair.
What is an airflow straightener?

An airflow straightener looks like a standard flat iron: two heated plates on a hinged body. The difference is inside. A small fan in the handle pushes air out through vents that run alongside the plates. A dedicated button switches the airflow on and off, so you can use the tool as a normal flat iron when you don't need it.
On the Venash Professional model, the air flows when the plates are pressed together. It reaches the hair while the section is still clamped, rather than afterwards, and that's why straightening and setting happen in one movement.
Airflow straightener vs. standard flat iron
| Standard flat iron | Airflow straightener | |
|---|---|---|
| Heating | Heated plates | Heated ceramic plates |
| Airflow | None | Built-in fan blows air through the plates |
| Setting the finish | Hair sets as it cools, or with a dryer afterwards | Set in the same pass as straightening |
| Tools at the station | Flat iron plus dryer | One tool for straightening and setting |
Which temperature should you use?
Heat is the one setting that matters most, and more is not automatically better. If one pass at 200°C gets the result, going up to 230°C only adds risk to the hair. Use this as a starting guide:
| Setting | Indicator | Best for |
|---|---|---|
| 170°C | 1 light | Fine, fragile, coloured or chemically processed hair |
| 200°C | 2 lights | Medium hair |
| 230°C | 3 lights | Thick, coarse or hard-to-manage hair |

Always start at the lowest setting that could work and test it on a small section first. For fine, coloured or chemically treated hair, apply a heat protectant before straightening.
How to straighten with an airflow straightener
- Prepare the hair. Start with dry, detangled hair and apply a heat protectant.
- Switch on. Slide the power switch to ON. The power light shows while the plates heat up.
- Choose the temperature. Press the temperature button to cycle through 170°C, 200°C and 230°C.
- Turn on the airflow. Press the fan button. Air will blow through the tool whenever the plates are pressed together. Press it again to turn the airflow off.
- Section and comb. Work in small, even sections and comb each one through before straightening.
- Clamp and glide. Clamp the plates firmly and glide from root to tip in one smooth, continuous movement. Repeat if needed.
- Finish safely. Slide the switch to OFF and let the tool cool completely before putting it away.

Safety features that matter in a busy salon
- 60-minute auto shut-off. If the tool is left on between clients, it switches itself off after an hour.
- 360° swivel cord. The cord turns with your hand, so it doesn't twist and tangle as you work around the head.
- Separate indicator lights. The power switch and the fan button each have their own light, so you can see at a glance what's running.
A few habits keep any hot tool lasting longer: never wrap the cord around the tool while it's warm, unplug it before cleaning, keep it away from basins and water, and stop using it straight away if the cord is damaged. Cord repairs should be done by a qualified service agent, not in the salon.
The Venash Professional Airflow Straightener
The Venash Professional Airflow Hair Dryer Straightener is the airflow model NX stocks for salons. NX Hair & Beauty is the sole distributor of Venash Professional in Malaysia.
- Ceramic heating plates for smooth, even heat
- Built-in airflow that blows through the plates when they're pressed together
- Three temperature settings (170°C, 200°C, 230°C) with LED indicators
- 60-minute auto shut-off
- 360° swivel cord
- Dark navy matte finish with gold Venash Professional branding
Buying for your salon
- 100% original stock. Supplied direct by NX, the sole Venash Professional distributor in Malaysia. See our Authenticity Guarantee.
- Single units or bulk. Pricing is set for each salon. Here's how trade pricing works.
- Local warranty support. Warranty is handled by NX here in Malaysia, not overseas. See Warranty & After-Sales Support.
- Delivery or collection. Peninsular Malaysia in 3–5 working days, East Malaysia in 3–7 working days, or collect from our showroom at T-063, 3rd Floor, Sungei Wang Plaza, Kuala Lumpur (open daily, 11am–7pm).
Trade enquiries: WhatsApp +60 16-297 6299.
Frequently asked questions
What is the difference between an airflow straightener and a normal flat iron?
Both use heated plates to straighten hair. An airflow straightener also has a built-in fan that blows air through the plates while they're closed, so the style is set in the same pass instead of needing a dryer afterwards.
What temperature should I use on bleached or coloured hair?
Start at the lowest setting, 170°C, apply a heat protectant and test on a small section first. Only go higher if the hair doesn't respond.
Does an airflow straightener replace a blow dryer?
The airflow is there to set the style while you straighten, so you don't have to pick up a dryer to finish each section. Use it on dry hair, as you would any flat iron. For rough-drying hair after a wash, keep using your blow dryer.
Does the Venash Airflow Straightener switch off automatically?
Yes. It shuts itself off after 60 minutes as a safety precaution.
Where can I buy the Venash Airflow Straightener in Malaysia?
From NX Hair & Beauty, the sole distributor of Venash Professional in Malaysia. Enquire on WhatsApp at +60 16-297 6299, or visit our showroom at T-063, Sungei Wang Plaza, Kuala Lumpur. We deliver nationwide.
